RME 12Mic-D handleiding
Handleiding
Je bekijkt pagina 23 van 85
Each port can send up to eight audio channels. At double and quad speed, the maximum of channels
per port is reduced to four and two respectively.
Even when no signal is routed, the outputs send a valid ADAT signal at the current
sample rate. This can be used to synchronize ('clock') other devices.
The quick start preset sends analog inputs 1-12 to ADAT output ports 1 (input 1-8) and 2 (input 9-12)
per default. The factory preset does not route any signal to ADAT outputs.
3.20. Mounting the Rack Adapter Brackets
When the device should be mounted in a 19" rack, the rack adapter brackets must be mounted first.
Mount each bracket with two screws using a Philips PH-1 screwdriver.
Do not use screws other than the ones included. Using longer screws can damage the
device internally!
Never insert the screws without the rack adapter bracket. This could damage of the
device!
RME 12Mic-D User’s Guide
3.20. Mounting the Rack Adapter Brackets | 22
Bekijk gratis de handleiding van RME 12Mic-D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RME |
| Model | 12Mic-D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11970 MB |
