Handleiding
Je bekijkt pagina 18 van 28
Rinnai 18 Portable Room AC OIM
SAVE A SERVICE CALL
SYMPTOM POSSIBLE CAUSES POSSIBLE SOLUTIONS
Appliance will not operate�
Not plugged into power� Plug into power�
Power switch OFF. Switch power ON�
Timer Function set. Wait or reset timer function.
Power to Appliance but it will not start.
After switching o the
appliance there may be a 3
minute delay before it may
be re-started.
Wait 3 minutes.
Room temperature is lower
than the set temperature.
Adjust the set temperature
to be lower than the room
temperature�
P1 appears on the display. Drain the water from the
drain outlets.
The air conditioner does not generate
enough cool air�
The air intake lters are
blocked
Clean air lters.
The set temperature is too
high�
Adjust the set temperature to
a lower temperature�
Drafts from open windows
and doors.
Close windows and doors
in the area you want to be
cooled�
Other heat sources in the
room�
Remove or turn o heat
sources.
Cooling space too big. Operate the appliance within
the required cooling capacity.
Too noisy or vibrating.
Operating surface not level Move the appliance to level a
operating surface.
Splashing sound.
High level of condensate
being generated�
This is normal. This appliance
has a pump that evaporates
some condensate through
the exhaust duct.
WHEN TO CALL FOR SERVICE
SYMPTOM CAUSE
There is a burning smell and a
strange sound coming from the
unit�
When operated if a circuit breaker
(safety, ground) is thrown or a fuse
is blown.
Turn o the air conditioner, and contact Rinnai.
CARE & MAINTENANCE
Bekijk gratis de handleiding van Rinnai RPC35MC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rinnai |
| Model | RPC35MC |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2973 MB |
