Rikon 70-305 handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 5 van 24

5

SAFETY INSTRUCTIONS

FIG. A

Sample of 220 volt plug required for this machine.

EXTENSION CORDS

Consult a qualied electrician

if the distance of the

machine from the electrical

panel is greater than 30 feet.

USE OF AN EXTENSION CORD

WITH THIS MACHINE IS NOT RECOMMENDED. FOR

BEST POWER AND SAFETY, PLUG THE MACHINE

DIRECTLY INTO A DEDICATED GROUNDED ELECTRI-

CAL OUTLET THAT IS WITHIN THE SUPPLIED CORD

LENGTH OF THE MACHINE.

IF AN EXTENSION CORD NEEDS TO BE USED, IT

SHOULD ONLY BE FOR LIMITED OPERATION OF THE

MACHINE. THE EXTENSION CORD SHOULD BE AS

SHORT AS POSSIBLE IN LENGTH, AND HAVE A

MINIMUM GAUGE SIZE OF 14AWG.

USE ONLY A 3-WIRE EXTENSION CORD THAT HAS

THE PROPER TYPE OF A 3-PRONG GROUNDING PLUG

THAT MATCHES THE MACHINE'S 3-PRONG PLUG AND

ALSO THE 3-POLE RECEPTACLE THAT ACCEPTS THE

TOOL’S PLUG.

Check extension cords before each

use. If damaged replace immediately. Never use a tool

with a damaged cord, since touching the damaged

area could cause electrical shock, resulting in serious

injury.

Use a proper extension cord. Only use cords listed by

Underwriters Laboratories (UL). Other extension cords can

cause a drop in line voltage, resulting in a loss of power

and overheating of tool. When operating a power tool out-

doors, use an outdoor extension cord marked “W-A” or “W”.

These cords are rated for outdoor use and reduce the risk

of electric shock.

Keep the extension cord clear of

the working area. Position the cord so that it will not

get caught on lumber, tools or other obstructions while

you are working with a power tool.

THIS SYMBOL DESIGNATES THAT

THIS TOOL IS LISTED BY THE

INTERTEK TESTING SERVICES,

TO UNITED STATES AND

CANADIAN STANDARDS.

DO NOT MODIFY ANY PLUG. If it will not t the electrical

receptacle, have the proper electrical receptacle installed

by a qualied electrician.

REPLACE A DAMAGED OR WORN CORD OR PLUG

IMMEDIATELY.

IMPROPER ELECTRICAL CONNECTION of the

equipment grounding conductor can result in risk of

electric shock. The conductor with the green insulation

(with or without yellow stripes) is the equipment grounding

conductor. DO NOT connect the equipment grounding

conductor to a live terminal if repair or replacement of the

electric cord or plug is necessary.

CHECK with a qualied electrician or service personnel if

you do not completely understand the grounding

instructions, or if you are not sure the tool is properly

grounded when installing or replacing a plug.

This tool is intended for use on a circuit that has a 220

volt electrical receptacle. FIGURE A shows the type of the

220v, 3-wire electrical plug and electrical receptacle that

has a grounding conductor that is required.

* Canadian electrical codes require extension cords to

be certied SJT type or better.

** The use of an adapter in Canada is not acceptable.

IN THE EVENT OF A MALFUNCTION OR BREAKDOWN,

grounding provides the path of least resistance for electric

current and reduces the risk of electric shock. This tool

is equipped with an electric cord that has an equipment

grounding conductor and requires a grounding plug (not

included). The plug MUST be plugged into a matching

electrical receptacle that is properly installed and grounded

in accordance with ALL local codes and ordinances.

ELECTRICAL SAFETY

THIS TOOL REQUIRES THE

INSTALLATION OF A 220V PLUG (NOT INCLUDED), AND

MUST BE GROUNDED WHILE IN USE TO PROTECT THE

OPERATOR FROM ELECTRIC SHOCK.

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Rikon 70-305, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd