Rikon 70-305 handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 2 van 24

2

TABLE OF CONTENTS

SPECIFICATIONS

NOTE: The specications, photographs, drawings and information in this manual represent the current model

when the manual was prepared. Changes and improvements may be made at any time, with no obligation on

the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to

ensure that the information in this manual is correct, to provide you with the guidelines for the proper safety,

assembly and operation of this machine.

Specications.....................................................................................................................2

Safety Instructions ........................................................................................................3 - 6

Getting To Know Your Machine ..............................................................................................7

Contents of Package .....................................................................................................7 - 8

Installation ......................................................................................................................8

Assembly ................................................................................................................................... 9

Operation ..................................................................................................................10 - 11

Adjustments...............................................................................................................12 - 14

Maintenance .................................................................................................................... 15

Electricals & Wiring Diagram .......................................................................................5 & 16

Troubleshooting ....................................................................................................................... 17

Parts Diagrams & Parts Lists .................................................................................. 18 - 21

Notes ......................................................................................................................... 15 & 22

Warranty .......................................................................................................................... 23

Motor .............................................................................................1-1/2 HP, TEFC

Volts, Phase ........................................................................................ 220 V, 1 Ph

Amps, Hertz ....................................................................................... 4.7 A, 60 Hz

Motor Speed (no load).......................................................................... 1,725 RPM

Direction ..................................................................................... Forward/Reverse

Swing Over Bed ................................................................................. 16” (46 mm)

Swing Over Tool Rest Base.............................................................. 12” (305 mm)

Distance Between Centers............................................................. 42” (1067 mm)

Speeds ............................................................................ Variable 0 - 3,200 RPM

Speed Ranges (2) ......................................................... 0 - 1,200; 0 - 3,200 RPM

Spindle Nose Threading....................................................................1-1/4” x 8 TPI

Headstock Taper ............................................................................................ MT-2

Tailstock Taper ............................................................................................... MT-2

Hole Through Drive Spindle .............................................................. 3/8” (10 mm)

Hole Through Tailstock ...................................................................... 3/8” (10 mm)

Tailstock RAM Travel ......................................................................... 4" (100 mm)

Number of Indexing Positions....................................................... 12 (36 possible)

Tool Rest Post Diameter ....................................................................1” (25.4 mm)

Headstock Rotation ........................................................................................ 360°

Spindle to Floor Distance .............................................................. 44“ (1118 mm)

Overall Size (LxWxH)........................ 77” x 22” x 47-1/4” (1956 x 559 x 1200 mm)

Base / Stand Size ........................................... 17-3/8” X 59-1/4” (441 x 1505 mm)

Net Weight ....................................................................................386 lbs (175 kg)

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Rikon 70-305, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd