Rikon 50-310 handleiding
Handleiding
Je bekijkt pagina 6 van 20
SAVE THESE INSTRUCTIONS.
Refer to them often.
6
1. Do not operate this machine until you have read all of the following instructions.
2. Do not attempt to operate this machine until it is completely assembled.
3. Do not turn ON this machine if any pieces are missing.
4. This machine must be properly grounded.
5. If you are not familiar with the operation of the machine, obtain assistance from a qualied person.
6. It is highly recommended that this machine be mounted to a at and secure work surface or stand.
7. Always wear protective eye wear and hearing protection when operating this machine.
8. Always wear a dust mask and use adequate dust collection and proper ventilation. Use of sanders can
produce harmful particles while sanding certain types of woods, composites or plastics.
9. Do not operate this machine if you are under the inuence of drugs, alcohol or medication.
10. Do not wear loose clothing or jewelry when operating this machine. Tie back long hair.
11. Do not wear any gloves while operating this machine.
12. Always make sure the power switch is in the OFF position prior to plugging in the machine.
13. Always make sure the power switch is in the OFF position and the machine is unplugged when doing
any cleaning, assembly, setup operations, or when not in use.
14. The use of any accessories or attachments not recommended may cause injury to you and damage
your machine.
15. Check the work piece for nails, screws or other materials that could tear or damage the sanding drums.
16. Sanding of metals is not recommended as sparks may ignite sawdust and wood shavings.
17. Sanding of berglass or similar materials is not recommended as particles can damage bearings.
18. Abrasive sanding drums should be the recommended diameter of the manufacturer.
19. Replace worn, frayed or torn abrasives as injury to the user, or the machine, may result.
20. Always keep your face and hands clear of moving parts such as discs, belts and pulleys.
21. Keep power supply cords free of any sharp or moving parts. Damaged cords can result in electric shock.
22. Always support the workpiece with the table.
23. Remove material or debris from the work area. Keep work area neat and clean.
SPECIFIC SAFETY INSTRUCTIONS FOR SANDERS
This machine is intended for the surfacing of natural, solid woods and composite materials. Any other use not
as specied, including modication of the machine or use of parts not tested and approved by the equipment
manufacturer can cause unforeseen damage, and invalidate the warranty.
ATTENTION:
Use of this sander still presents risks that cannot be eliminated by the manufacturer. Therefore,
the user must be aware that wood working machines are dangerous if not used with care and all safety precau-
tions are adhered to.
SAFETY INSTRUCTIONS
This owner’s manual is not a teaching aid and is intended to show
assembly, adjustments, and general use.
Bekijk gratis de handleiding van Rikon 50-310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rikon |
| Model | 50-310 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8170 MB |
