Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 68 van 332
"Invert" On
"Invert" On
"Invert" Off
"Invert" Off
Figure 5.3 Waveform Invert
TIP
When the waveform invert is enabled, the trigger edge or the trigger polarity will change (e.g.
Edge trigger, Pulse trigger, or Slope trigger).
5.8 Probe
The analog channel of this oscilloscope not only supports the common passive probe,
but also the active probe. It can automatically recognize the currently connected
probe type and its probe ratio. For detailed technical information of the probes,
please refer to the corresponding Probe User Guide.
Enable the touch screen operation and tap the channel status label at the bottom of
the screen. Then the
Vertical system interface is displayed. Then tap Probe to enter
the Probe setting menu.
Figure 5.4 Probe Setting Menu
To Set the Vertical System
MHO2000 User Guide
50
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
