Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 64 van 332
the front-panel Vertical SCALE knob to switch the scale adjustment mode
between "Coarse" and "Fine".
• Fine adjustment: Click or tap the icon at the right side of the input field of Scale
to further adjust the vertical scale within a relatively smaller range to improve
the vertical resolution. If the amplitude of the input waveform is a little bit
greater than the full scale under the current scale and the amplitude would be a
little bit lower if the next scale is used, fine adjustment can be used to improve
the amplitude of waveform display to view signal details.
• Coarse adjustment: Click or tap the icon at the right side of the input field of
Scale to adjust the vertical scale at 1-2-5 step, i.e. 200 μV/div, 500 μV/div, 1 mV/
div, 2 mV/div, 5 mV/div, 10 mV/div...10 V/div.
5.3 To Adjust the Vertical Offset
Vertical offset indicates the offset of the signal ground level position of the waveform
from the screen center in the vertical direction. Its unit is consistent with the currently
selected amplitude unit (refer to
Amplitude Unit
). When adjusting the vertical offset,
the waveforms of the corresponding channel moves up and down. The vertical offset
information (as shown in the following figure) in the channel status label at the
bottom of the screen will change accordingly.
The adjustable range of the vertical offset is related to the current input impedance,
probe ratio, and vertical scale.
When CH1 is turned on and activated, you can adjust the vertical offset in the
following ways.
• Rotate the Vertical
POSITION knob at the right section of the front panel to
adjust the vertical offset within the adjustable range. Rotate this knob clockwise
to increase the vertical offset or rotate it counterclockwise to reduce the vertical
offset. Pressing down the knob can quickly reset the vertical offset (set the
vertical offset to 0).
• Enable the touch screen function, and then adjust the vertical offset with the
drag gesture. For details, refer to
Drag
.
To Set the Vertical System
MHO2000 User Guide
46
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
