Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 184 van 332
Figure 10.12 XY Mode Setting Menu
TIP
By default, XY mode is unavailable. It is only available when the horizontal time base mode is
"XY". To enable the XY mode, please refer to
XY Mode
.
Adjust the Cursor Position
• Click or tap to select the "X" tab under the Select menu item to set the X value
for the specified cursor.
- Click or tap the input field of
AX and use the pop-up numeric keypad to set
the X value at Cursor A.
- Click or tap the input field of BX and then use the pop-up numeric keypad
to set the X value at Cursor B.
- Click or tap to select "ON" for the
AX BX menu item to adjust the X value at
Cursor A and the X value at Cursor B simultaneously.
• Click or tap to select the "Y" tab under the
Select menu item to set the Y value
for the specified cursor.
- Click or tap the input field of AY and use the pop-up numeric keypad to set
the X value at Cursor A.
- Click or tap the input field of
BY and then use the pop-up numeric keypad
to set the X value at Cursor B.
- Click or tap to select "ON" for the
AY BY menu item to adjust the Y value at
Cursor A and the Y value at Cursor B simultaneously.
Measurements
MHO2000 User Guide
166
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
