Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 127 van 332
Figure 8.31 SPI Trigger Setting Menu
After selecting the trigger type, and then the current trigger setting information
(including trigger type, trigger source, and trigger level) is displayed in the trigger
information label at the top of the screen, as shown in the figure below. The
information will change based on the trigger settings.
Source Selection
Click or tap the drop-down button of CLK and MISO to select the analog channel or
digital channel of the source of CLK and MISO. For the channel sources supported by
different models, refer to descriptions in
Trigger Source
. The current trigger source is
displayed in the trigger information label at the top of the screen.
Only when we select the channel (that has been input with signals) as the trigger
source, can we obtain a stable trigger.
Edge Type
Click or tap the drop-down button of
Slope to select the desired clock edge type.
• Rising: samples the MISO data on the rising edge of the clock.
• Falling: samples the MISO data on the falling edge of the clock.
Trigger Condition
Click or tap the drop-down button of When to set the trigger condition.
To Trigger the Oscilloscope
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. MHO2000 User Guide
109
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
