Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 126 van 332
• SCL Level: Click or tap the input field of SCL Level to set the level of SCL with
the pop-up numeric keypad. You can also use the specified multifunction knob
to set it.
• SDA Level: Click or tap the input field of SDA Level to set the level of SDA with
the pop-up numeric keypad. You can also use the specified multifunction knob
to set it.
For details, refer to descriptions in
Trigger Level
. The current trigger level is displayed
in the trigger information label at the top of the screen.
8.7.15 SPI Trigger
In SPI trigger, after the CS or timeout condition is satisfied, the oscilloscope triggers
when the specified data is found. When using SPI trigger, you need to specify the CLK
clock sources and MISO data sources.
Below is the sequential chart of SPI bus.
SDA
SCL
CS
D7
D6 D5
D4 D3
D2 D1 D0
Figure 8.30 Sequential Chart of SPI Bus
Trigger Type
Click or tap the drop-down button of Type to select "SPI" from the drop-down list.
Then set the parameters for SPI trigger.
To Trigger the Oscilloscope
MHO2000 User Guide
108
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
