Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 112 van 332
Figure 8.17 Window Trigger Setting Menu
After selecting the trigger type, and then the current trigger setting information
(including trigger type, trigger source, and trigger level) is displayed in the trigger
information label at the top of the screen, as shown in the figure below.
Source Selection
Click or tap the drop-down button of Source to select the desired analog channel
from the drop-down list. The current trigger source is displayed in the trigger
information label at the top of the screen.
Only when we select the channel (that has been input with signals) as the trigger
source, can we obtain a stable trigger.
Edge Type
Selects the desired input signal edge on which the oscilloscope triggers.
• Rising: triggers on the rising edge of the input signal when the voltage level is
higher than the preset high trigger level.
• Falling: triggers on the falling edge of the input signal when the voltage level is
lower than the preset low trigger level.
• Either: triggers on the rising or falling edge of the input signal when the voltage
level meets the preset trigger level.
To Trigger the Oscilloscope
MHO2000 User Guide
94
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
