RIDGID SeeSnake Compact M40 DSL handleiding

Niet gecategoriseerd

RIDGID

48 pagina's

PDF beschikbaar

Handleiding

6 – English – Compact M40 DSL / Compact M40

Pre-Operation Inspection

WARNING

To reduce the risk of serious injury from

electrical shock or other causes, and to

prevent damage to your equipment, in-

spect all equipment and correct any

problems before each use.

To inspect all equipment, follow these steps:

1� Power off your equipment�

2� Disconnect and inspect all cords, ca-

bles, and connectors for damage or

modification�

3� Clean any dirt, oil, or other contamina-

tion from your equipment to ease in-

spection and to prevent it from slipping

from your grip during transport or use�

4� Inspect your equipment for any broken,

worn, missing, misaligned, or binding

parts, or any other condition which

might prevent safe, normal operation�

5� Refer to the instructions for all other

equipment to inspect and make sure it

is in good, usable condition�

6� Check your work area for the following:

• Adequate lighting�

• The presence of flammable liq-

uids, vapors, or dust that may ig-

nite� If present, do not work in area

until sources have been identified

and corrected� The equipment

is not explosion proof� Electrical

connections can cause sparks�

7� A clear, level, stable, and dry place for

the operator� Do not use the equipment

while standing in water�

8� Examine the job to be done and de-

termine the correct equipment for the

task�

9� Observe the work area and erect bar-

riers as necessary to keep bystanders

away�

See additional product specific safety in-

formation and warnings starting on page

Bekijk gratis de handleiding van RIDGID SeeSnake Compact M40 DSL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.