RIDGID RB-FXP handleiding
Handleiding
Je bekijkt pagina 9 van 52
Storage
Store the charger and batteries
in a dry, secured, locked area that is out of
reach of children and people unfamiliar with
proper charger operation.
Remove batteries from tool or charger before
storage. The battery packs and charger should
be protected against hard impacts, moisture
and humidity, dust and dirt, extreme high and
low temperatures, and chemical solutions and
vapors.
Long term storage in the fully charged
state, the fully discharged state or in tempera-
tures above 140°F (60°C) can permanently re-
duce the capacity of a battery pack.
Cleaning
WARNING
Unplug charger and remove battery be-
fore cleaning. Do not use any water or
chemicals to clean charger or batteries
to reduce the risk of electrical shock.
Remove any dirt or grease from the exterior of
the charger and battery pack with a cloth or
soft, non-metallic brush.
Service and Repair
WARNING
Improper service or repair can make the
machine unsafe to operate.
There are no user-serviceable parts for this
charger or battery packs. Do not attempt to
open charger or battery cases, charge individ-
ual battery cells, or clean internal components.
For information on your nearest RIDGID Au -
thorized In depen dent Service Center or any
service or repair questions see Contact Infor -
mation section in this manual.
Once the battery is charged, it may re-
main on the charger until use. There is no
risk of over-charging the battery.
5. When charging is complete, with dry hands,
remove the battery from the charger and
unplug the charger from outlet.
Figure 8 – Inserting Battery Into Charger
Inserting/Removing Battery In
Tool
1. With dry hands, insert battery into recepta-
cle. Battery only fits into receptacle one
way. If the battery will not fully seat into the
receptacle, do not force. In some appli-
cations, a latch on the tool will engage
the battery to retain it when inserted.
Figure 9 – Installing/Removing Battery In Tool
2. To remove battery, release the latch (if ap-
plicable) and pull straight out (Figure 9).
3. Always remove the battery from the tool
when making adjustments, changing at-
tachments or storing.
7
999-995-239.10_REV. C
RBC-FXP Battery Charger
WARNING
NOTICE
Latch
Bekijk gratis de handleiding van RIDGID RB-FXP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RIDGID |
| Model | RB-FXP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9084 MB |
