RIDGID 918-I handleiding
Handleiding
Je bekijkt pagina 14 van 68
Figure 15 – Remove Drive Shaft
Removing and Installing Roll Sets with
Two-Piece Drive Shafts (1", 1
1
/
4
" – 1
1
/
2
",
2" – 6" Copper)
1. Removing Groove Roll:
• Fully raise the upper roll housing by moving the
pump release lever to the return position, away
from the operator.
• Loosen groove roll set screw (Figure 11). Grasp
groove roll and remove upper shaft and groove roll
from the Groover (Figure 12).
2. Removing Drive Roll From Drive Shaft:
• Open motor and transmission cover.
• Use
3
/
16
" hex key to loosen the two screws on the
front half of the transmission coupling (Figure 13).
• Use the spanner wrench to loosen and remove the
drive shaft retaining nut (Figure 14).
• Pull the drive shaft assembly forward. Remove
drive shaft bearing retaining nut and the front half
of the coupling (Figure 16). Reinsert drive shaft.
Figure 16 – Removing Bearing, Retaining Nut and Front
Half of Coupling
• Manually rotate the drive shaft while applying
pressure to the spindle lock pin until the lock pin
engages the spindle lock hole in the drive shaft.
• With the spindle lock engaged, use a
15
/
16
" wrench
to loosen the draw bolt (Figure 17).
• Tap draw bolt with a mallet to release drive roll
from drive shaft.
• Unthread draw bolt from drive roll, remove drive
roll.
Figure 17 – Engaging Spindle Lock and Loosen Draw Bolt
3. Installing New Drive Roll:
• Install new drive roll, insert and hand-tighten draw
bolt.
• Manually rotate the drive shaft/drive roll assembly
while applying pressure to the spindle lock pin until
the lock pin engages the spindle lock hole in the
drive shaft.
999-998-676.10_REV. C12
918-I Heavy Duty Roll Grooving Machine
Bekijk gratis de handleiding van RIDGID 918-I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RIDGID |
| Model | 918-I |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20740 MB |
