Handleiding
Je bekijkt pagina 57 van 428
Placing an Original and Loading Paper
55
1
• Do not set an original that is wet with correcting fluid or ink. The scanning glass will
be stained and the stain will be scanned with the original.
Placing Originals in the One-pass Duplex Scanning ADF
• Do not touch the parts shown below while scanning originals by using the ADF. If
you touch these parts, they may generate static electricity which may cause
lines to appear on the resulting scan.
• Do not add originals while other originals are being fed.
• If you want to add the originals to the bottom of the original stack on the ADF,
remove the originals temporarily to add the new originals, and then reload the
combined stack of originals.
1. Adjust the paper guides to the size of the originals.
2. Place the aligned originals squarely face up and place them all the way straight
into the one-pass duplex scanning ADF.
Place the originals with the first page facing up.
Fan sheets before loading so that multiple originals do not stick to each other and
are not fed at once. If the edge of the paper is not cut well, the edges of the paper
curl back, forming what are called burrs. Before you set originals with burrs, fan the
originals carefully.
Do not stack the originals beyond the limit mark.
Bekijk gratis de handleiding van Ricoh IM 370, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ricoh |
| Model | IM 370 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 47753 MB |
Caratteristiche Prodotto
| Soort bediening | Touch |
| Kleur van het product | Wit |
| Ingebouwd display | Ja |
| Gewicht | 41000 g |
| Breedte | 374 mm |
