Rheem 876A26PF handleiding
Handleiding
Je bekijkt pagina 35 van 48
35
CONNECTIONS – ELECTRICAL
All electrical work and permanent wiring must be carried out by a qualified person and in accordance with the
Wiring Rules AS/NZS 3000 and all local codes and regulatory authority requirements.
Warning: Temperature controllers must not be fitted to this water heater (874 series) if it is installed as an
in-series gas booster with a solar water heater system because water at a temperature much higher than the
controller setting can be delivered. If a solar water heater is installed to an existing water heater installation,
then all controllers must be disconnected and removed.
The water heater is supplied with a 1.8 metre lead and plug and requires a weatherproof 220 V - 240 V a.c.
50 Hz general purpose outlet (GPO) to be located within 1.2 metres of the installation. The GPO must be clear
of the flue exhaust, draining water, gas supply pipe and water connections.
The power consumption of the water heater is:
Power consumption (watts) - Burner on, anti-frost device inactive
874A12, 876A12
874A16A, 876A16
874A20, 876A20
874A26, 876A26
Model
220 V – 240 V
220 V – 240 V
220 V – 240 V
220 V – 240 V
Natural
29.1
35.9
43.9
60.1
Propane
38.0
41.0
47.6
64.8
Power consumption (watts) - Burner on, anti-frost device active
874A12, 876A12
874A16A, 876A16
874A20, 876A20
874A26, 876A26
Model
220 V – 240 V
220 V – 240 V
220 V – 240 V
220 V – 240 V
Natural
104
108
116
133
Propane
109
112
119
136
The water heater will only operate on a sine wave at 50 Hz. Devices generating a square wave cannot be used
to supply power to the water heater.
Bekijk gratis de handleiding van Rheem 876A26PF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rheem |
| Model | 876A26PF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7567 MB |