RGBlink Q16pro Gen2 handleiding
Handleiding
Je bekijkt pagina 9 van 64
Q16pro User Manual
9
Click [Communication Settings] to do settings of IP and Serial Communication.
IP Settings: Display IP address of the device by default. You can turn off DHCP to manually set the IP
address, subnet mask and gateway. Then click [Save] on the right corner to save parameters.
Serial Communication:
COM Port: default COM port. If connected, it will show “Connection” .
Baud Rate: default data: 115200
Data Bits: 8
Stop Bits: 1
Parity: None
Fan Control
Click [Fan Control] to do settings of fan speed. Two modes are optional. The default mode is
Auto-Adjustment Mode. If you need to manually control the fan speed, please turn off the
Auto-Adjustment Mode to adjust the fan speed.
If the temperature of the device exceeds 70℃, a prompt will pop up on the LCD screen as shown above.
Bekijk gratis de handleiding van RGBlink Q16pro Gen2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RGBlink |
| Model | Q16pro Gen2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24524 MB |
