REMKO LTE 60 Eco handleiding
Handleiding
Je bekijkt pagina 28 van 36
Cleaning the units
The unit housing must be opened to allow the
inside of the unit to be cleaned and to provide
access to electrical components.
NOTICE!
Adjustment and maintenance work may only be
carried out by authorised qualified technicians.
1. Loosen the two fastening screws [C].
2. Lift up the service flap and unhook the top
lugs.
C
3. Clean the condenser fins by blowing, with
suction or using a smooth brush.
4. Clean the evaporator fins, for example with a
lukewarm soap solution (or similar).
NOTICE!
When cleaning the exchanger
, particular care
must be taken because the fine aluminium fins
bend very easily.
5. Never subject to direct jets of water
.
6. Rinse with clean water to remove any
remaining soap.
7. Clean the internal surfaces of the unit and
the fan blade.
8. Clean the condensate trap and the connec-
tion nozzle.
9. Once cleaning has been completed, the unit
should be dried. T
ake particular care with
electrical components!
10. Re-install all dismantled components in
reverse order
.
11. Carry out a unit function check and electrical
safety check.
WARNING!
An electrical safety check must be carried out in
accordance with VDE 0701 after any work on
the units.
REMKO LTE Eco series
28
Bekijk gratis de handleiding van REMKO LTE 60 Eco, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | REMKO |
| Model | LTE 60 Eco |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 5275 MB |
