Reloop Keypad Pro handleiding
Handleiding
Je bekijkt pagina 4 van 36
ENGLISH
4
Before operating this equipment we ask you to carefully study and observe all instructions. Please remove the Keypad Pro from its packaging.
Check before an initial operation to make sure that the device has not been visibly damaged during transport. If you detect any damage to the
USB cable or the casing, do not operate the device. Contact your specialized dealer.
SAFETY INSTRUCTIONS
CAUTION! Please exercise particular caution when handling power voltage. This voltage rating may lead to a critical electrical shock! Any
damage caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage
to property or for personal injury caused by improper handling or non-observance of the safety instructions.
• This device left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation the user must observe the safety instruc-
tions and warnings contained in this operation manual.
• For reasons of safety and certication (CE) the unauthorized conversion and/or modication of the device is prohibited. Please note that in the event of
damage caused by the manual modication to this device, any warranty claims are excluded.
• The inside of the device does not contain any parts which require maintenance, with the exception of worn parts that can be exchanged from the out-
side. Qualied staff must carry out maintenance, otherwise, the warranty does not apply!
• Ensure that the power will only be supplied after the device has been fully set up. Always plug in the USB plug last.
• Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and correctly hooked up. Refer to your dealer if you
have any questions.
• Ensure that when setting up the product the USB cable is not squashed or damaged by sharp edges.
• Disconnect the device when not in use and before cleaning! Be sure to hold the USB plug by the body. Never pull the USB cord!
• Position the device on a horizontal and stable base.
• Avoid any concussions or violent impact when installing or operating the device.
• When selecting the location of installation make sure that the device is not exposed to excessive heat, humidity, and dust. Be sure that no cables lie
around openly. You will endanger your own safety and that of others!
• Do not rest any containers lled with liquid that could easily spill onto the device or its immediate vicinity. If, however, uids should access the inside of
the device, immediately disconnect the USB plug. Have the device checked by a qualied service technician before reuse. Damage caused by uids
inside the device is excluded from the warranty.
• Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device away from direct expo-
sure to the sun and heat sources such as radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or vents. Always
ensure sufcient ventilation.
• The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused at this moment may
destroy your device. Do not switch on or operate the device until it has reached ambient temperature!
• Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cleaned with a damp cloth.
Never use solvents or cleaning uids with a petroleum base for cleaning.
• When relocating, the device should be transported in its original packaging.
• At commercial facilities, the regulations for the prevention of accidents as stipulated by the organization of professional associations must be observed.
• At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibility by trained staff.
• Keep this operation manual in a safe place for later reference in the event of questions or problems.
APPLICATION IN ACCORDANCE WITH REGULATIONS
• This device is a professional MIDI Keyboard for controlling a DAW software. The device needs to be connected to a computer (USB) or a smart device
(Wireless MIDI).
• If the device is used for other purposes than those described in the operation manual, damage can be caused to the product, leading to the exclusion
of warranty rights. Moreover, any other application that does not comply with the specied purpose harbors risks such as short circuits, res, electrical
shocks, etc.
• The serial number determined by the manufacturer must never be removed to uphold the warranty rights.
MAINTENANCE
• Check the technical safety of the device regularly for damage to the USB cable or the casing, as well as for wear out of wear parts such as buttons and switches.
• If it is to be assumed that a safe operation is no longer feasible then the device must be disconnected and secured against accidental use. Always
disconnect the USB cable from the outlet!
• Disconnect the USB cable from your computer.
• It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if the device no longer functions, following longer
storage under unfavorable conditions or after major transport stress.
Bekijk gratis de handleiding van Reloop Keypad Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Reloop |
| Model | Keypad Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5177 MB |