Handleiding
Je bekijkt pagina 76 van 99
76
START CHANNEL SEARCH
Satellite: Other Operators
Change Satellite
Settings
Transponder Edit
Normally, no values
need to be adjusted in
the settings. Navigate
to "Next" and press the
OK button to move to
the next menu item.
Skip encrypted
programmes
Network search
Blind search
Once you have made the setting, navigate to "Next"
and press the OK button to start the search. Once the
search is complete, a display will open showing which
programme mode has been set. Press the OK button
to confirm. The number of channels found is now
displayed. Navigate to "Done" and press the OK
button and the device switches to programme
playback.
SATELLITE SETTINGS
In the satellite settings, you can select the satellite and make LNB settings.
Note:
The satellite settings do not normally need to be changed and should only be changed by
experienced users.
1. Press the configuration button to open the quick settings. The "gear symbol" is selected. Press the OK
button to open "All settings".
2. Navigate to "General" and press the ► button. Now select "Programmes" and press the OK button.
3. Now select the "Programme Tuning & Settings” menu item and press the OK button.
4. You are now in the "Programme Tuning" menu. Select "Satellite settings" and press the OK button.
5. You can now add another satellite or adjust the settings for the current satellite.
6. Navigate to the satellite you want to set or to Add satellite and press the OK button.
7. The following setting options are available.
8. Note that if a new satellite has been added or the settings have been changed, a new search must be
performed.
Add Satellite
Navigate to "Add satellite" and press the OK button. Select the satellite you want
to add and press the OK button. Please note that this setting can only be used if
you have a multi-switch that combines the satellites on one satellite line. The TV
set only has one satellite connection. Note the settings for the multi-switch that
must be made in the satellite settings.
Customise satellite
settings
Satellite: Select the satellite. The default is Astra 19.2E
LNB frequency: Select the LNB frequency based on your LNB. The default is
9750/10600.
Transponder: The transponder frequencies for the corresponding satellite are
displayed here.
22 kHz Tone: This option is related to the "LNB frequency" and cannot be
changed for all LNB frequencies.
LNB Power: Activate or deactivate the LNB power depending on the selection of
the multiswitch or LNB. The option is switched on by default.
DiSEqC: Set the DiSEqC setting using the multiswitch. The option is switched off
by default.
Unicable: Activate or deactivate the "Unicable" menu item depending on the
selection of the LNB or multi-switch. The setting is switched off in the default
setting. If the option is switched on, you have access to the "Unicable settings".
Unicable Settings: Select the Unicable settings based on the LNB or multiswitch.
The following options are available: Unicable type, satellite position, range
number and range frequency.
UK
Bekijk gratis de handleiding van Reflexion LDDW40iBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Reflexion |
| Model | LDDW40iBT |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 6542 MB |
