Handleiding
Je bekijkt pagina 10 van 32
9
REPAIR AND MAINTENANCE
Replacing the Chain and Tire
Required Tools: Phillips Screwdriver and Two (2) 19 mm Wrenches
2 Using two 19 mm wrenches,
loosen both axle nuts.
3 Push the chain tensioner down
to loosen the chain and remove the
chain from the wheel sprocket and
motor sprocket. Push and remove
the wheel downward.
Note: Your hands will get greasy
doing this.
1 Loosen screws and remove
chain guard.
Note: The arrangement of the
hardware sequence:
Right Side (Throttle)
16-1 Nut
16-2 Washer
Frame
16-3 Spacer
Left Side (Brake)
16-1 Nut
16-2 Washer
Frame
16-3 Spacer
16-1
16-1
16-2
16-2
16-3
16-3
3 Check all three (3) fuses to see if
the fuse(s) have burned out. Remove any
fuse that is damaged or burned
out and replace with a new one of
equal amperage.
Note: Amperage is located on top
of fuse.
4 Close the fuse cover and reattach
the seat fairing.
2 Remove the seat fairing and
battery cover to locate the
three (3) fuse boxes attached to
the batteries.
1 Remove the battery cover by
unscrewing the five (5) bolts with an
Allen wrench.
Replacing the Fuse
Required Tool: 5 mm Allen Wrench
WARNING: To prevent
shock, please follow the
instructions accordingly and do
not skip any steps.
3 Fuse Boxes
Amperage
Number
1
2
3
4
5
Bekijk gratis de handleiding van Razor Blade 15, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Razor |
| Model | Blade 15 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 10243 MB |