Rangemaster P60 handleiding
Handleiding
Je bekijkt pagina 22 van 28
16
ArtNo.800-0126 - Fitting the sealing strip
This dishwasher is for use in GB and IE only. After sales service
applies to GB and IE only.
Positioning the Dishwasher
Read all warnings located on the packaging before removing
the packaging and positioning the machine.
n
Do not install the dishwasher in a room where the
temperature is likely to fall below freezing (0 °C).
n
Do not grip the door when moving the dishwasher.
When positioning the machine, place it in an area where
dishes can be easily loaded and unloaded.
The dishwasher should be aligned to the front of the adjacent
cabinets, with allowance made for the door thickness.
Place the machine close to a water tap and drain. Take into
consideration that the connections will not be altered once
the machine is in position.
Before installing the dishwasher into a kitchen cabinet,
holes must not be drilled into the sides, or door, to avoid
compromising the performance and operation of the
dishwasher.
A plastic self-adhesive anti-condensation strip is supplied
with the dishwasher. Fix the strip to the underside of the
worktop, along the front edge (Fig. 7.1).
Connect up the cold water supply, the drain hose and the
electrical connections (see below) then slide the dishwasher
into the cabinet opening.
Leave an adequate distance around the machine to allow
ease of movement when cleaning.
n
Ensure the water inlet and outlet hoses are not
squeezed or trapped and that the machine does not
stand on the electrical cable while positioning.
Adjust the feet so the machine is level and balanced. The
machine should be placed on at ground otherwise it will be
unstable and the door of the machine will not close properly.
Water connection (Fig. 7.2)
We recommend tting a lter to your water inlet supply
in order to prevent damage to your machine due to
contamination (sand, rust, etc.) from indoor plumbing. This
will also help prevent yellowing and deposit formation after
washing.
Water inlet hose
n
WARNING: Use the new water inlet hose supplied
with your machine, do not use an old machine’s
hose.
n
WARNING: Run water through the new hose before
connecting.
7. Installation
Fig. 7.1
Fig. 7.2
Note printing on the water inlet hose!
If models are marked with 25° the water temperature may be
max. 25 °C (cold water).
For all other models:
Cold water preferred; hot water max. temperature 60 °C.
• DocNo.800-0503 - Installation - RDW459 dishwasher
Bekijk gratis de handleiding van Rangemaster P60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rangemaster |
| Model | P60 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4698 MB |