Rangemaster P60 handleiding
Handleiding
Je bekijkt pagina 16 van 28
12
9. Extra Dry Touch Button
Press the Extra Dry touch button to add extra drying steps
to a programme in order to obtain drier dishes. This option
increases water temperature of the nal rinse step and
duration of the drying step.
NOTE: If an option is not compatible with the selected
program, a buzzer sounds.
NOTE: If an extra feature has been used on the most recent
wash programme, this feature will remain active on the next
selected programme. To cancel this feature on the newly
selected wash programme, press the feature button until the
light on the button switches o.
10. Salt lack warning indicator
When there is insucient softening salt, the Salt Lack
Warning Indicator will illuminate to indicate the salt chamber
needs lling.
11. Rinse Aid lack warning indicator
When there is insucient rinse aid, the Rinse Aid Lack
Warning Indicator will illuminate to indicate the rinse aid
chamber needs lling.
NOTE: If you decide not to start the selected programme,
please see the
“Changing a Programme” and “Cancelling a Programme”
sections.
Changing a Programme
Follow the steps below to change a programme while in
operation.
1. Open the door and press the Programme touch button
(2) to select a new programme. If the door is opened
during operation, the time remaining of the selected
programme will show on the display (3).
2. After closing the door, the newly selected programme
will resume the course of the old programme.
NOTE: Open the door slightly at rst to stop a wash
programme before it is complete in order to avoid water
spillage.
7.1 Cancelling a Programme
Follow the steps below to cancel a programme while in
operation or in standby mode.
1. Open the door of the machine, the most recently
selected programme will be shown on the display.
2. Press and hold the Programme touch button (2) for 3
seconds. At the end of 3 seconds, ‘1’ will show on the
Display (3).
3. The water discharge process will start after the door of
the machine is closed and will continue for 30 seconds.
When the programme is cancelled, a buzzer will sound
5 times.
NOTE: When the door is opened after the selected wash
programme is complete, a buzzer will sound and ‘0’ will show
on the display (3).
7.2 Switching the Machine Off
When the selected wash programme is complete, a buzzer
will sound 5 times. You can then switch your machine o
using the Power On/O touch button (1).
NOTE: Do not open the door before a programme is
complete.
NOTE: Leave the door of your machine slightly open at the
end of a wash programme to speed up drying.
NOTE: If the door of the machine is opened or the power is
cut during operation, the programme will continue when the
door is closed or the power returns.
NOTE: If the power is cut or the machine door is opened
during the drying process, the programme will terminate.
Your machine will now be ready for a new programme
selection.
Buzzer Sound Control
To change the buzzer sound level, follow the below steps:
1. Open the door and press Extra Dry /Energy Save (5,9)
and Half Load (6) touch buttons simultaneously for 3
seconds.
2. When sound setting is recognized, buzzer gives a long
sound and machine will display last set level, from “S0”
to “S3”.
3. To decrease sound level press Extra Dry / Energy Save
touch button (5,9). To increase sound level, press Half
Load touch button (6).
4. To save the selected sound level, turn o the machine.
’’S0’’ level means all voices are o. Factory setting is “S3”.
Bekijk gratis de handleiding van Rangemaster P60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rangemaster |
| Model | P60 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4698 MB |