Rane RPD 1 handleiding
Handleiding
Je bekijkt pagina 2 van 16
Manual-2
RPD 1 PROGRAMMING & DIAGNOSTICS UNIT - FRONT PANEL
AUDIO OUT SIG indicator: Lights when the Audio Out signal is above -25 dBu. Use to check signal flow.
AUDIO OUT OL indicator: Lights when the Audio Out signal is 2 dB before clipping.
AUDIO IN SIG indicator: Lights when the Audio In signal is above -25 dBu. Use to check signal flow.
AUDIO IN OL indicator: Lights when the Audio In signal is 2 dB before clipping.
STATUS—MODEM RX indicator: Lights when receiving data from Modem.
STATUS—MODEM TX indicator: Lights when transmitting data to Modem.
STATUS—MODEM AA indicator: Lights when Modem is sent an Auto Answer command.
STATUS—MODEM OH indicator: Lights when Modem is sent an Off Hook command.
STATUS—UDP RX indicator: Lights when receiving data to the User Data Port.
STATUS—UDP TX indicator: Lights when transmitting data from the User Data Port.
STATUS—ROUTE RW indicator: Lights when the Modem is routed through RW 232.
STATUS—ROUTE UDP indicator: Lights when Modem is routed through the User Data Port.
COM indicator: Flashes randomly when receiving valid data from the control system or PC. If the DEVICE ADDRESS is
not within a valid range (1-250), this LED flashes steadily at ½ second intervals.
POWER indicator: Lights when the processor is operational.
The modem to be used with the RPD 1 must meet these criteria:
1. 28.8 kbps minimum speed.
2. External
3. Hayes compatible.
RPD 1 MODEM COMPATIBILITY
Bekijk gratis de handleiding van Rane RPD 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rane |
| Model | RPD 1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2001 MB |
