Rane ECM 64 handleiding
Handleiding
Je bekijkt pagina 18 van 26
Manual-18
Device Type (DT):
$32 = ECM 64
Manufacture’s Identification code (ID):
$08 = Rane Corporation
Channel Number codes (CHNUM):
Typically set to 0, unless otherwise stated.
Memory Number codes (MEMNUM):
$00 = live or working memory, $01 = preset memory #1, $02 = preset memory #2, ... , $10 = preset memory #16 (ECM 64 has
16 preset memories)
Communications status codes (COMSTAT):
$00 = no error
$01 = invalid data
$02 = invalid command code
$03 = device locked
$04 = device not locked
$05 = channel(s) muted
$06 = channel(s) not muted
$07 = checksum error
$08 = not connected
Operational Status codes (OPSTAT):
$00 = Opstat Ok
$07 = RW232 RX Overflow
$09 = RW232 Parity Error
$0A = Not Ready
$0B = Flash Error
Send data to channel (81 hex):
Transmit ADDR header ($FB XX $FB XX, where XX = ADDR) (See Note 9)
Get DT
Get ID
Transmit $00 $XX (where $XX = number of data bytes to follow including checksum)
Transmit $81 (command code)
Transmit $00 (CHNUM)
Transmit MEMNUM
Transmit 2 bytes; the starting SPL param byte index (See Note 5)
Transmit SPL
Transmit Checksum
Get COMSTAT
Program channel from memory (82 hex):
Transmit ADDR header ($FB XX $FB XX, where XX = ADDR) (See Note 9)
Get DT
Get ID
Transmit $00 $04 (where $04 = number of data bytes to follow including checksum)
Transmit $82 (command code)
Transmit $00 (CHNUM) ($00 = program device, $01 = program inputs settings only, $02 = program outputs settings only)
(See Note 4)
Transmit MEMNUM
Transmit Checksum
Get COMSTAT
Bekijk gratis de handleiding van Rane ECM 64, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rane |
| Model | ECM 64 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3260 MB |
