Radial Engineering Twinline handleiding
Handleiding
Je bekijkt pagina 3 van 16
True to the Music
®
Radial Engineering Ltd.
Twinline™ Effects Loop Router
InTroduCTIon
The Twinline is basically a switcher that lets you toggle your pedalboard
and effects between two ampliers using their rear panel effects loop. In
other words, you can have one set of pedals and then route it to either
of your two amps so that you do not need to duplicate your pedalboard
setup.
GUITAR ABY
AMP-A
AMP-B
TWINLINE PEDALS
Before you start to reach for your cables, you should consider your amp
and effects setup and prepare your connections based on how you
intend to use them. Furthermore, it is good practice to turn off all of
your audio equipment and ampliers before making connections. This will
prevent plug-in or power-on transients that could damage more sensitive
components. Once you are ready, and have made the connections, you
can plug in the Twinline’s 15VDC power supply. This turns on the Twinline
as there is no power switch. A handy cable lock may be used to secure
the cable in place.
1
Bekijk gratis de handleiding van Radial Engineering Twinline, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Twinline |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2700 MB |
