Radial Engineering Twinline handleiding
Handleiding
Je bekijkt pagina 10 van 16
Radial Engineering Ltd.
Twinline™ Effects Loop Router
True to the Music
®
8
reMoTe ConTrollInG THe TWInlIne
There are two ways to toggle the effects loop between the amps. The
easiest is to use the front panel AB select switch. This works great in
the studio when you are not under the pressure of doing quick switches
during a live show. However, if you consider all of these cables going
back and forth to the Twinline and your amps, when playing live, it is best
to keep the Twinline near your amp where you can hide the cable mess
and keep the cables as short as possible in order to reduce susceptibility
to noise.
The Twinline is able to be remotely controlled in a number of ways.
This includes using a standard latching footswitch, a Radial-equipped
Slingshot pedal, using the optional JR2 or SW2 remote footswitches or
the contact closure from a MIDI controller.
usInG THe oPTIonal Jr2 reMoTe
The Radial JR2 is a dual footswitch remote that can toggle the AB loops
and bypass the effects altogether. It receives current from the Twinline to
power its LEDs thus providing visual status at your feet. Connection from
the JR2 is accomplished using a standard ¼” TRS cable.
Bekijk gratis de handleiding van Radial Engineering Twinline, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Twinline |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2700 MB |
