Radial Engineering SW4 handleiding
Handleiding
Je bekijkt pagina 4 van 16
True to the Music
Radial Engineering Ltd.
SW4 User Guide
2
FEATURE SET OVERVIEW
TOP PANEL DETAILS
6 7 9
11
108
1 2 3 4 5
1. INPUT CHANNELS (1-4): Each of the four independent
channels feature A/B switching, trim level controls, LED signal
indicators and PFL monitoring.
2. STEREO LINKING: Channels may be used independently or
linked together for stereo, tri-channel or quad switching.
3. PFL MONITOR: Pre-fader listen switch allows the A or B input
to be monitored via the headphone and auxiliary ¼" mono
outputs.
4. BUS OUT: Volume control with on/off switch and LED indicator
lets you set the level of the mix bus XLR and ¼" outputs.
5. PHONES: Headphone amplier equipped with a level control
to monitor the stereo mix bus and PFL system.
6. POWER SUPPLY: External power supply connects with a
locking XLR connector for reliable power.
7. FOOT SW and LINK JACKS: The ¼" FOOT SW jack is
used to connect the optional Radial JR•2 remote control. The
¼"LINK jack is used to pass the control command to more
SW4s and expand the number of channels.
8. BUS OUTPUTS: Stereo balanced XLR and unbalanced ¼"
outputs. Each channel can feed the bus whereby Channels-1
and 3 are routed to the left output and Channels-2 and 4 routed
to the right. A top mounted mono sum switch may be engaged
to route all four channels to both outputs.
9. CHANNEL INPUTS: Each channel has A and B balanced
inputs for connecting primary and backup source devices.
10. CHANNEL OUTPUT: Each of the four channels features a
balanced XLR output that is transformer isolated to prevent
hum and buzz caused by ground loops.
11 12 13 14
See below
11. GROUND LIFT: Disconnects the ground from the channel XLR
outputs to eliminate hum and buzz caused by ground loops.
12. BUS TRIM: This ‘set-n-forget’ control is used to set the level of the
left and right ¼" outputs. It allows the XLR and ¼" bus outputs to
operate at different levels.
13. BUS GROUND LIFT: Disconnects the ground from the stereo
bus XLR outputs to eliminate hum and buzz caused by ground
loops.
14. BUS ASSIGN: This two position switch lets you operate the
mix bus in either stereo or mono.
Bekijk gratis de handleiding van Radial Engineering SW4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | SW4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7076 MB |
