Radial Engineering Plexitube handleiding
Handleiding
Je bekijkt pagina 6 van 20
MAKING CONNECTIONS
As with any pedal, make sure your amp is off and the volume
turned down before making connections. Connect your guitar to
the input of the Plexitube and the output of the Plexitube to your
amplifi er. There is no power switch on the Plexitube. Connecting
the 15VDC power supply automatically activates the Plexitube.
The Plexitube is designed to stay on for long periods and leaving
it on will exert very little wear and tear on the tube. Like a tube
amplifi er, the Plexitube should be allowed to warm up for a few
minutes so the tube can reach a stable operating temperature.
USING THE PLEXITUBE
The Plexitube is now ready for operation. Turn on your amp and
bring up the volume slowly to ensure proper connections have
been made. To start, set your amp to a clean sound so you can
hear how each of the Plexitube functions work.
FOOTSWITCHES
The Plexitube features two footswitches. The fi rst footswitch
is labeled TRUE-BYPASS and selects the clean sound of your
amp. When in true-bypass mode, the bypass LED will illuminate,
signaling the Plexitube is switched 'OUT' of your signal chain.
The second footswitch, labeled TOGGLE, selects between the
two Plexitube distortion channels. Each channel has its own
LED to indicate the Plexitube’s channel status.
The cool thing about the true-bypass mode is that it allows you
to toggle between the rhythm and lead channels to prepare for
the next sound. Try it! Activate the true-bypass footswitch. Now
switch between the Plexitube channels by stepping on the chan-
nel TOGGLE footswitch. The channel LEDs will alternately light
up but the Plexitube will remain in bypass mode until the true-
bypass footswitch is depressed again.
CONTROL PANEL
The Plexitube is extremely versatile and easy to use. To begin,
we recommend setting the Plexitube up as follows:
With these settings, the rhythm and solo channels will sound
quite different. Start by adjusting the output LEVEL controls for
each channel to your desired listening level. You are now ready
to start experimenting with the other controls.
To understand how the Plexitube works, follow the signal path
through the block diagram from left to right. We will discuss each
block in the order the signal passes through them.
4
True to the Music
Radial Engineering
Plexitube
Bekijk gratis de handleiding van Radial Engineering Plexitube, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Plexitube |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3269 MB |
