Radial Engineering Phazerbank handleiding

Niet gecategoriseerd

Radial Engineering

16 pagina's

PDF beschikbaar

Handleiding

True to the Music

Mic A - placed

close to beater

head.

Mic B - placed

outside drum

shell.

Contrabass

Engineers often combine the signals

from a piezo contact pickup (A) and a

microphone (B) when recording an upright

bass. This is very much like the acoustic

guitar application because the piezo's

signal arrives instantaneously followed

by the mic's signal a moment later.

Shifting the piezo signal into alignment

will reinforce the fundamentals creating a

bigger, more natural bass sound.

Radial Engineering

Phazerbank

™

The resulting comb-ltering makes mixing the sound more di󰀩cult

and the low-frequency denition from the bass may be lost for most

listeners. As it is impossible to solve all of the phase problems in a

room (due to reections o󰀨 walls and ceilings), the intent is to at least

provide the mix position with the best sound possible so that the end

mix is balanced. This is where the Phazerbank comes in. By inserting

the Phazerbank on the bass guitar signal going into the PA system,

we can shift the phase so that the PA and bass amp play together in

phase.

Kick Drum - a Better Beater Sound

Engineers often use two mics on a kick drum. The rst mic (A), typi-

cally a condenser, is placed close to the drum head to pickup up the

beater sound for added snap. A second mic (B), often a dynamic, is

positioned outside the drum to pickup the over-

all low frequency. The distance between the two

mics creates a phase o󰀨-set which the Phazer-

bank can compensate for. Insert the Phazerbank

into the signal path of Mic A to time-align the two

mics for a tighter sounding track.

The Phazer aligns the sig-

nals for a bigger and tighter

kick drum sound.

The two signals arrive at

dierent times.

Bekijk gratis de handleiding van Radial Engineering Phazerbank, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.