Radial Engineering J+4 handleiding
Handleiding
Je bekijkt pagina 6 van 6
www.radialeng.com
RADIAL ENGINEERING 3 YEAR TRANSFERABLE LIMITED WARRANTY
RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and
workmanship and will remedy any such defects free of charge according to the terms of this warranty.
Radial will repair or replace (at its option) any defective component(s) of this product (excluding nish
and wear and tear on components under normal use) for a period of three (3) years from the original
date of purchase. In the event that a particular product is no longer available, Radial reserves the
right to replace the product with a similar product of equal or greater value. In the unlikely event that
a defect is uncovered, please call 604-942-1001 or email service@radialeng.com to obtain an RA
number (Return Authorization number) before the 3 year warranty period expires. The product must be
returned prepaid in the original shipping container (or equivalent) to Radial or to an authorized Radial
repair centre and you must assume the risk of loss or damage. A copy of the original invoice showing
date of purchase and the dealer name must accompany any request for work to be performed under
this limited and transferable warranty. This warranty shall not apply if the product has been damaged
due to abuse, misuse, misapplication, accident or as a result of service or modication by any other
than an authorized Radial repair center.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF
AND DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD
DESCRIBED ABOVE OF THREE YEARS. RADIAL SHALL NOT BE RESPONSIBLE OR LIABLE
FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM
THE USE OF THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY DEPENDING ON WHERE YOU LIVE
AND WHERE THE PRODUCT WAS PURCHASED.
J+4 SPECIFICATIONS
Frequency response: 10Hz ~ 20kHz +/- 1dB (-3dB at 40kHz)
Signal to noise: >100dB
Input level: -10dBu typical
Maximum input level: +17dBu
Maximum output level: +15dBu
Dynamic range: 100dBu
Total harmonic distortion + noise: 0.004% @ 1k with -10dBu input (+4dBu output)
Channel separation: >90dB
Self noise: -95dBu
Input impedance: 10k-Ohms
Output impedance: 600-Ohms typical
High pass lter (low cut): -3dB at 100Hz
XLR conguration: AES standard pin-1 ground, pin-2 hot, pin-3 cold
Power supply: 15VDC 400mA center pin positive
Power requirement: 30mA draw
Construction: 14-gauge chassis, outer shell, baked enamel nish
Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm)
Weight: 1.55 lb (720g)
Radial Engineering Ltd.
J+4 User Guide
Bekijk gratis de handleiding van Radial Engineering J+4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | J+4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1390 MB |
