Radial Engineering ChainDrive handleiding

Niet gecategoriseerd

Radial Engineering

10 pagina's

PDF beschikbaar

Handleiding

ChainDrive™ Distribution Ampli er

True to the Music

Radial Engineering Ltd.

Connecting unbalanced sources

The ChainDrive can distribute unbalanced line-level signals from electronic instruments like

keyboards and samplers. To interface an unbalanced audio device to the ChainDrive’s input

an adapter cable is needed that terminates in a 3-pin male XLR connector where pin-1 is

ground, pin-2 is hot, and pin-3 is left open.

TIP

SLEEVE

SHIELD

UNBALANCED SOURCE

TIP= +SIGNAL

SLEEVE= GROUND

CHAINDRIVE INPUT

PIN2= +SIGNAL

PIN3= - (OPEN)

PIN1= GROUND

Once connected, the ChainDrive distributes unbalanced signals via the four front panel

¼” outputs. Connect the outputs using standard ¼” instrument cables. The output level is

variable from inﬁ nity to +18dBu with an unbalanced input.

Connecting stereo sources

The ChainDrive can also be used to distribute an unbalanced stereo signal to the four stereo

outputs. To interface an unbalanced stereo device to the ChainDrive’s input an adapter cable

is needed that terminates in a 3-pin male XLR connector where pin-1 is ground, pin-2 is the

left channel, and pin-3 is right channel.

SHIELD

RING

TIP

SLEEVE

STEREO SOURCE DEVICE

TIP= LEFT CHANNEL

RING= RIGHT CHANNEL

SLEEVE= GROUND

CHAINDRIVE INPUT

PIN2= LEFT CHANNEL

PIN3= RIGHT CHANNEL

PIN1= GROUND

TIP

SLEEVE

TIP

SLEEVE

SHIELD

STEREO SOURCE DEVICE

LEFT CHANNEL

STEREO SOURCE DEVICE

RIGHT CHANNEL

CHAINDRIVE INPUT

PIN2= LEFT CHANNEL

PIN3= RIGHT CHANNEL

PIN1= GROUND

Connecting stereo outputs

A stereo adapter cable is used to interface the ChainDrive’s front panel ¼” TRS outputs

to the inputs of your unbalanced stereo devices. Here, the ChainDrive’s ¼” TRS outputs

are conﬁ gured like stereo headphones where the tip is the left channel, the ring is the right

channel, and the sleeve is a common ground.

RING

TIP

SLEEVE

RING

TIP

SLEEVE

TIP

SLEEVE

TIP

SLEEVE

SHIELD

RING

TIP

SLEEVE

SHIELD

LEFT CHANNEL

RIGHT CHANNEL

CHAINDRIVE OUTPUT

TIP= LEFT CHANNEL

RING= RIGHT CHANNEL

SLEEVE= GROUND

CHAINDRIVE OUTPUT

TIP= LEFT CHANNEL

RING= RIGHT CHANNEL

SLEEVE= GROUND

STEREO

TIP= LEFT CHANNEL

RING= RIGHT CHANNEL

SLEEVE= GROUND

Bekijk gratis de handleiding van Radial Engineering ChainDrive, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.