Radial Engineering Catapult Rack TX handleiding
Handleiding
Je bekijkt pagina 7 van 12
True to the Music
Radial Engineering Ltd.
Catapult Rack™
LIFTING THE GROUND
5
Each bank of four channels on the
Catapult Rack is equipped with a ground
lift switch. Start with this switch set to the
‘out’ position.
If you hear noise on one of the banks
after you have connected to your source
and destination devices, try engaging this
switch as it can help eliminate ground
loop noise such as hum and buzz.
However, note that lifting the ground will disconnect phantom power,
which means that condenser mics or active DI boxes will not work on that
bank of channels.
USING THE CATAPULT RACK TX AND RX AS A PAIR
To use the Catapult Rack units in their simplest form, connect the TX to
the RX using three Cat 5 cables. This creates a 12 channel rackmount
audio snake that allows you to send balanced mic or line-level signals
from one distant location to another.
The ground lift switch
Bekijk gratis de handleiding van Radial Engineering Catapult Rack TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Catapult Rack TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2161 MB |
