Radial Engineering BT-Pro handleiding
Handleiding
Je bekijkt pagina 6 van 12
Radial Engineering Ltd.
BT-Pro™ Bluetooth DI
True to the Music
®
3
MAKING CONNECTIONS
Before making any connections, always ensure your audio system is either
turned down or turned off in order to protect more sensitive components
from damage caused by loud turn-on or plug-in transients. The BT-Pro
uses a USB Mini-B connector and cable for its power requirements. Use
the included ‘Mini-B to TYPE A’ USB cable and connect to a computer,
USB hub or the included USB wall charger. You may also use any
standard USB wall charger that is included with most phones and tablets,
as the BT-Pro will only draw a small amount of current.
To block DC current, activate the
transformer isolation by switching
the LEFT-ISO and RIGHT-ISO to
the ‘right’ position.
IMPORTANT NOTE: Feeding 48V phantom power to the BT-Pro can
damage the unit if the protective transformers are not inserted into the
signal path. Ensure that you turn off phantom power for the channels
connected to the BT-Pro. If only a global phantom power switch is
present, then make sure the transformers are inserted!
TYPE A uSB
Fits most laptops and computers
OFFON
BE SURE THAT THE BT-PRO IS TURNED OFF BEFORE CONNECTING
THE POWER CABLE to avoid initial intermittent power spikes to the
electronics.
TYPE Mini-B uSB
Used to connect to the BT-Pro
Bekijk gratis de handleiding van Radial Engineering BT-Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | BT-Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1734 MB |
