Rademacher Troll Comfort-3D 5635 Handleiding (112 Pagina's)

Handleiding

44

EN

14. Moving to a target position

If necessary, you can enter an arbitrary target position for your roller

shutter which you can then move to directly. Moving to the target posi-

tion and stopping the roller shutter is done automatically.

Automatic movement after approx. two seconds

The device will initiate movement to the conﬁgured target position

automatically if no button is pressed for approx. two seconds.

i

In order to use this function, it is necessary to previously

determine and conﬁgure the run time for the connected

tubular motor, see page 78.

The ventilation position is ignored when moving to the

target position.

1. / Display the current position of the roller shutter

by brieﬂy pressing one of the buttons.

The current position is given as a

percentage [ % ].

2. / Enter the desired target position (e.g. 20 %) by

repeatedly pressing the button.

The arrows [ / ] show the resulting direction

of travel.

Value = roller shutter position

0 % = fully open

100 % = fully closed

3. The roller shutter will automatically move to the target position and

stop after approx. two seconds.

Bekijk gratis de handleiding van Rademacher Troll Comfort-3D 5635, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.