Rademacher Troll Comfort-3D 5635 Handleiding (112 Pagina's)

Handleiding

30

EN

8.1 Important information prior to the electrical

connection and installation

Setting the end points on the tubular motor

You must conﬁgure the end points of the tubular motor before

installing it and making the ﬁnal electrical connection otherwise

malfunctions may occur.

It is essential that you set both end points of the tubular motor if no end

points have been set yet.

Parallel connection of electronic tubular motors

A maximum of 3 tubular motors can be connected in parallel to the Troll

Comfort or Troll Comfort 3D (e.g. RADEMACHER electronic tubular motors).

In order to do so, follow the information in the instruction

manual of the tubular motor being used.

i

Parallel connection of mechanical tubular motors

A cut-oﬀ relay is required in order to connect mechanical tubular mo-

tors in parallel.

Requirements for blockage detection *

Blockage detection is only operational if a mechanical tubular motor is

connected.

Function of inputs E1 and E2 *

Both inputs can be conﬁgured independently of each other. You can

conﬁgure the functions of the inputs in menu 9.8.6, depending on the

required purpose of the connected signal transducers, see page 95.

You can obtain connection and circuit examples from our website at

www.rademacher.de

* not available for the Troll Comfort 3D

Bekijk gratis de handleiding van Rademacher Troll Comfort-3D 5635, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.