Rademacher RolloTron Standard DuoFern 1400 handleiding

Niet gecategoriseerd

Rademacher

48 pagina's

PDF beschikbaar

Handleiding

Set the upper end point

Simultaneously press and hold the

buttons.

The roller shutters travel up.

1.1

Tighten the belt slightly, until it is tensioned by the

weight of the roller shutters.

Release the buttons as soon as the roller

shutter achieves the desired position

for the upper end point.

The roller shutter stops and the upper

end point is stored.

ATTENTION!

Setting the wrong upper end point may lead to over-

load or damage the RolloTron Standard DuoFern or

the drive.

◆ Do not set the upper end point right up to the limit

stop.

◆ Release the button promptly and never allow it to

extend beyond the respective end point.

11. End point adjustment

Additional information about conﬁguring the end

points

The end points must be conﬁgured in order that the roller

shutters stop at the desired upper and lower positions. It is

imperative that both end points are conﬁgured, otherwise

malfunctions may occur.

If the RolloTron Standard DuoFern is operated without

an end point setting, the drive will continue to run for

as long as one of the two control buttons is actuated.

The automatic functions remain blocked until the end

point setting is conﬁgured.

Bekijk gratis de handleiding van Rademacher RolloTron Standard DuoFern 1400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.