Rademacher DuoFern 9485 handleiding
Handleiding
Je bekijkt pagina 60 van 124
60
EN
15.2 Menu 2 - Setting automatic heating phases
You can set automatic heating phases for each day with
the desired switching time and target temperature.
Maximum number of daily heating phases
A maximum of six heating phases can be set up for each day.
Pre-setting the week programme
First select the desired week programme in menu 9.5,
see page 79.
Additional information about the setting:
◆ The switching times of the heating phases are set in 15
minute steps (e.g. 06:00, 06:15, 06:30 etc.)
◆ A new heating phase cannot be set before the previous
heating phase
◆ Four adjustable target temperatures are stored. These can
be randomly assigned to the individual heating phases
◆ If the setting of a heating phase sequence should be
terminated, select and confirm the next switching time
with:
◆ The setting of the heating phases can also be
terminated by pressing and holding the SET button
Bekijk gratis de handleiding van Rademacher DuoFern 9485, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rademacher |
| Model | DuoFern 9485 |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 7300 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Breedte | 50 mm |
| Diepte | 50 mm |
| Hoogte | 12 mm |
| Stroombron | AC |
