Rademacher DuoFern 9485 handleiding
Handleiding
Je bekijkt pagina 110 van 124
110
EN
18.3 Menu 9.9.3 - Setting the transmission channel
If a DuoFern actuator is logged on to the DuoFern Thermostat
9485 via radio, a control valve can be regulated by this. Direct
cabling between the DuoFern Room Thermostat 2 and the
control valve is not required.
If a multi-channel DuoFern actuator is used for this, the channel
that is used must be set on the DuoFern Room Thermostat 2.
i
Pay attention when wiring the DuoFern actuator to
the control valve to the channel used and check that
the control valve actually also controls the control
commands of the DuoFern Room Thermostat 2.
1. Open menu 9.9.3.
2. Set and confirm the transmission
channel.
1 = Channel 1
2 = Channel 2
A = All channels
Bekijk gratis de handleiding van Rademacher DuoFern 9485, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rademacher |
| Model | DuoFern 9485 |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 7300 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Breedte | 50 mm |
| Diepte | 50 mm |
| Hoogte | 12 mm |
| Stroombron | AC |
