QSC unHX2D handleiding
Handleiding
Je bekijkt pagina 9 van 17
Attero Tech by QSC unHX2D
User Manual
QSC, LLC 2020 614-00038
Notes for mounting: All connections to the unHX2D should be made before the power is applied.
o Attach any audio sources that will be used to the analog audio inputs. The analog audio inputs are balanced, so
be sure to check what output type the source to be connected uses in order to find how to connect it correctly
(see Hardware Connections section).
o Attach the outputs to the required audio devices. The analog outputs are balanced, so be sure to check what
input type the device to be connected requires in order to find how to connect it correctly (see Hardware
Connections section 0 for further details).
*Note: All Attero Tech by QSC products are tested using UTP cabling and it is recommended that UTP cabling be used
when installing them. STP cabling can be used for installation though care must be taken not introduce grounding issues
into the system by doing so.
When powering using PoE:
o Attach the Dante™/AES67 port to a spare PoE-enabled port on a PoE switch using a CAT-5 cable or better. If a
mid-span injector is being used, connect a spare input port to the Dante™/AES67 network switch using a CAT-5
cable, and then connect the corresponding output port to the Dante™/AES67 port of the unHX2D.
When powering using an optional external supply:
o Attach the Dante™/AES67 I/F port to a spare port on the Dante™/AES67 network switch using a CAT-5 cable or
better.
o Attach the power supply to the power input jack and then power up the external supply.
If all steps are performed correctly, the power light on the front should be lit. Some of the status LED’s may also be lit or
flashing.
If the Dante™/AES67 interface is being used, there may also be some activity on the unHX2D Dante Ethernet connector
LEDs. If the cable is connected and no network is detected, both LEDs will remain off. If an active connection is made both
LEDs will come on and if there is network activity, the yellow LED will then flash.
Bekijk gratis de handleiding van QSC unHX2D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | unHX2D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2861 MB |
