QSC unD4I-L handleiding
Handleiding
Je bekijkt pagina 10 van 19
Attero Tech by QSC unD4I-L
User Manual
QSC, LLC 2020 614-00025
2.3 – Hardware Connections
The unD4I-L accepts unbalanced or balanced audio from source devices. Refer to the following diagrams and instructions
for connecting different types of audio devices. Professional grade audio cabling is recommended to achieve the best
audio performance throughout the system.
2.3.1 – Input from an Unbalanced Source
To connect a 2-wire unbalanced source to the unD4I-L, connect the positive output of the unbalanced source to the
positive input of the unD4I-L. Connect both the source and unD4I-L input grounds together, and short the negative input
of the unD4I-L to ground at the input of the unD4I-L.
+
Source
+
-
Shield
unD4I-L
Input
Figure 4 - 2-Wire Unbalanced Source Connection
To connect unbalanced sources with a 3-wire connection, short the negative conductor to the shield at the source
connection.
+
Source
+
-
unD4I-L
Input
Shield
Figure 5 - 3-Wire Unbalanced Source Connection
2.3.2 – Input from a Balanced Source
To connect balanced sources to the unD4I-L, connect positive output to positive input, negative output to negative input,
and connect the grounds together through the cable shield.
+
Source
+
-
Shield
unD4I-L
Input
-
Bekijk gratis de handleiding van QSC unD4I-L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | unD4I-L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2811 MB |
