QSC TSC-7w handleiding
Handleiding
Je bekijkt pagina 9 van 12
9
TD-000485 -01 -A
Connections
Refer to Figure 5
1. Feed the cables through the opening in the wall/bracket.
2. Connect the LAN-A with PoE RJ-45 connector to the LAN-A/PoE socket
(1) on the
back of the TSC-7w.
3. Optional – Connect the LAN-B RJ-45 connector to the LAN-B socket (2) on the
back of the TSC-7w.
4. If you are using an external power source, connect the barrel connector to the
TSC-7w 12V DC AUX Power input connector (4).
Mount the TSC-7w to the Mounting Bracket
Refer to Figure 6
1. Align the mounting slots (1) on the TSC-7w with the
mounting hooks (2) and carefully slide the TSC-7w into the
Mounting Bracket. Make sure the cables are not pinched or
stressed.
2. When the TSC-7w is in the mounting bracket, gently press
down to engage the hooks with the slots. Make sure all four
hooks are properly engaged.
3. Secure the TSC-7w to the mounting bracket with two screws
(3).
IMPORTANT!: Before you can use the
TSC-7w, you must confi gure the Q-Sys design
using Q-Sys Designer. Refer to the Q-Sys
Designer on-line help for details.
— Figure 5 —
+
LAN A/PoE LAN B USB 12V DC
RESET
123 4
— Figure 6 —
1332
Bekijk gratis de handleiding van QSC TSC-7w, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | TSC-7w |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1296 MB |
