QSC QIO-AES8x8 handleiding
Handleiding
Je bekijkt pagina 3 van 26
3
Maintenance and Repair
WARNING: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted
maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of
additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station
or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of
the customer, owner or user of the apparatus to facilitate those repairs.
IMPORTANT! 24V DC power supply or Power over Ethernet (PoE) PSE required. The QIO-FLEX4A requires an IEEE 802.3at
Type 2 (PoE+) PSE or 802.3af Type 1 Class 3 PoE PSE if the device amplifier is not used. All other QIO models require an 802.3af Type 1
PoE PSE. See “QIO Series Control I/O Expanders - Cont’d” on page 11.
FCC Statements
QIO Series Audio I/O Expanders (except QIO-TEL2) and Control I/O Expanders
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
QIO-TEL2 Only
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
New Zealand Telepermit
QIO-TEL2: The unit’s answering system only responds to Distinctive Alert cadence(s) DA1 and DA3.
Environmental
• Expected Product Life Cycle: 10 years
• Ambient Operating Temperature Range: 0°C to +50°C
• Storage Temperature Range: -20°C to +70°C
• Relative Humidity: 5 to 85% RH, non-condensing
Bekijk gratis de handleiding van QSC QIO-AES8x8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | QIO-AES8x8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2811 MB |
