Handleiding
Je bekijkt pagina 23 van 25
23
Changing from Passive to Bi-Amp Mode
To change from Passive to Bi-amp or Bi-amp to Passive mode:
1. Remove the six screws holding the input cup in place.
2. Remove the input cup, being careful not to place excess stress on the connecting
wiring harness.
3. Remove the wiring harness plug from the receptacle at the bottom of the cup.
4. Insert the wiring harness plug into the desired mode receptacle at the bottom of
the cup.
5. Turn the input cup over and verify that the yellow is visible in the proper
SETTING port. If not, move the plug to desired receptacle.
6. Carefully place the input cup back into position on the enclosure, being careful
not to bind or pinch any of the wiring.
7. Secure the input cup with the six screws removed in step 1.
HPF
N/C
1+
1 -
2 -
2+
HF
LPF
LF
NL4 /
Barrier Strip
NL4 /
Barrier Strip
1+
1 -
2 -
2+
HF
LF
Passive Mode Bi-Amp Mode
Passive
Bi-Amp
Bekijk gratis de handleiding van QSC PL-CA12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | PL-CA12 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2605 MB |
