QSC DCP 200 handleiding
Handleiding
Je bekijkt pagina 23 van 24
21
22
cmd>dcp300mute=1
Return value:
dcp300mute=1
To turn master mute off:
cmd>dcp300mute=0
Return value:
dcp300mute=0
To query current state of master mute:
cmd>dcp300mute=
Return value:
dcp300mute=1
If invalid or out of range value entered:
cmd>dcp300mute=a
Return value:
dcp300mute=invalid
Note: Current state of Master Mute will remain active
dcp300fader
Sets the Master Volume level to the value specified in dB (-90.0 to 10.0 in .5dB increments). If no value is entered following the ‘=’ character, the cur-
rent Master Volume level is returned. If a ‘+’ character is entered following the ‘=’ character, then the volume is incremented by .5 dB (not to exceed
the maximum allowable volume of 10.0 dB). If a ‘–‘ character is entered following the ‘=’ character, then the volume is decremented by .5 dB.
Examples:
To set Master Volume to 5 dB:
cmd>dcp300fader=5.0
Return value:
dcp300fader=5.0
To increment volume by .5 dB:
cmd>dcp300fader=+
Return value (assuming volume previously set to 5 dB):
dcp300fader=5.5
To decrement volume by .5 dB
cmd>dcp300fader=-
Return value (assuming volume previously set to 5 dB):
dcp300fader=4.5
To query current volume:
cmd>dcp300fader=
Return value:
dcp300fader=4.5
If invalid or out of range value entered:
cmd>dcp300fader=20.0
Return value:
dcp300fader=invalid
Note: Master Volume will remain at current level
dcp300version
Returns the version of the DCP firmware (in the form: major.minor.build).
Example:
To read the DCP 300 firmware version:
cmd>dcp300version=
Return value:
dcp300version=1.00.0039
Bekijk gratis de handleiding van QSC DCP 200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | DCP 200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4301 MB |
