QSC DCM-3 handleiding
Handleiding
Je bekijkt pagina 25 van 36
25
The Hearing Impaired output signal
is available on the screw terminal
connector on the rear of the DCM.
The output signal is similar to
levels that are output from a
standard CD player.
HEARING IMPAIRED CONNECTION
INSTALLATION Connections: Hearing Impaired, Powered Subwoofer
Screw terminal connections make it
possible to send a balanced signal
to a powered subwoofer. This
signal is balanced and the circuitry
is designed for long cable runs from
the projection booth to the
theater screen. The high-pass
filtering and level adjustments are
done by the DCM unit.
NOTE: There will be no fault
analysis or output audio monitoring
available for the sub channel signal
if this connection
is used.
POWERED SUBWOOFER CONNECTION
DCM-1 Terminals DCM-2 and -3 Terminals
DCM-1 Terminals DCM-2 and -3 Terminals
Output Level Impedance
-11.8 dBu 50 ohms
(200 mV rms) (±5%)
Connect other end of cable according to
equipment manufacturer’s instructions.
Connect other end of cable according to
equipment manufacturer’s instructions.
Use balanced audio connections and high-quality, shielded, balanced audio
cable for interconnecting the DCM and Hearing Impaired equipment. Balanced
connections are less prone to noise pick-up than unbalanced connections.
Use balanced audio connections and high-quality, shielded, balanced audio
cable for interconnecting the DCM and Powered Subwoofer equipment. Balanced
connections are less prone to noise pick-up than unbalanced connections.
Bekijk gratis de handleiding van QSC DCM-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | DCM-3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3283 MB |
