Promise Technology VESS A7800 Handleiding (108 Pagina's)

Handleiding

SATA disk drive mounted in a drive carrier

Counter-sink screws

(two screws on each side)

installing 3.5” disk drive in tHe carrier

The instructions below apply 3.5” hard disk drives installed in drive carriers intended for use with models Vess

A7600 and Vess A7800.

1. Remove a disk drive carrier.

2. Carefully lay the disk drive into the drive carrier at the front, so that the screw holes on the sides line up

correctly with the power and data connectors facing away from the carrier handle.

3. Insert the screws through the holes in the drive carrier and into the sides of the disk drive.

Install only the counter-sink screws supplied with the drive.

• Install four screws per drive.

• Snug each screw. Be careful not to over-tighten.

4. Reinstall the drive carrier into the enclosure.

Repeat steps 1 through 3 until all of your disk drives are installed.

22

IntroductionVess A7000 Series Storage Appliance for Video Surveillance

Bekijk gratis de handleiding van Promise Technology VESS A7800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.