Promise Technology VESS A7600 Handleiding (108 Pagina's)

Handleiding

N+1 PSUs

Connect all power supplies

to a suitable power source.

Vess A7800 N+1 power connecons

PSU status LEDs

connect tHe power

Insert one power cable into the power receptacle for each power supply and connect the each PSU to a suitable

power source. The subsystem is equipped with three power supplies in an N+1 arrangement.

Each PSU has a Status LED. After boot up, check the LEDs on each power supply on the back of the device.

These LEDs will light green to indicate normal operation. A red LED indicates a problem or unit failure.

Warning

Turn off the power and disconnect all power cord before

servicing the Vess A7600 and Vess A7800.

Important

The Vess A7800 features three N+1 power supplies. In this arrangement,

one PSU is redundant, so a minimum of two PSUs are needed to power up

the enclosure.

The Vess A7600 feature two N+1 power supplies. In this arrangement, one

PSU is redundant, so a minimum of one PSU is needed to power up the

enclosure.

25

Promise Technology Product Manual

Bekijk gratis de handleiding van Promise Technology VESS A7600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.