Promise Technology VESS A3340S Handleiding (243 Pagina's)

Handleiding

/ 243

Je bekijkt pagina 76 van 243

Creating a Spare Drive (CLU)

Only uncongured physical drives can be used to make spares. Check your available drives under Physical Drive

Management. See “Physical Drive Management (CLU)” on page 47.

1. Main Menu >>

Spare Drive Management

>>

Create New Spare Drive

A default physical drive is shown with possible alternative choices.

2. To choose different drive, highlight the drive, press the backspace key to remove the current number,

then type a new number.

3. Highlight Revertible and press the spacebar to toggle between

Yes

and

No

.

A revertible drive can be returned to spare status after you replace the failed drive in a disk array.

4. Highlight

Spare Type

and press the spacebar to toggle between

Dedicated

and

Global

.

Dedicated means this spare drive can only be used with the specied disk arrays. Global means this

spare drive can be used by any disk array.

If you chose Dedicated, a default disk array is shown with possible alternative choices.

To choose different array, highlight the array and press the backspace key to erase the current number,

then type the new number.

5. Press Control-A

to save the spare drive.

65

Managing with CLUVess A3340s / Vess A3340d / Vess A3340 PoE

/ 243

Bekijk gratis de handleiding van Promise Technology VESS A3340S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.