Promise Technology VESS A3340S Handleiding (243 Pagina's)

Handleiding

/ 243

Je bekijkt pagina 74 van 243

Running Transition on a Disk Array (CLU)

Transition is the process of replacing a revertible spare drive that is currently part of a disk array with an

uncongured physical drive or a non-revertible spare drive.

In order to run Transition:

•

ThesparedrivemustbeRevertible.

• Youmusthaveanunconguredphysicaldriveofthesameorlargercapacitytoreplacethesparedrive.

To run Transition on a disk array:

1. Main Menu >>

Disk Array Management

2. Highlight the disk array you want and press Enter.

3. Highlight

Background Activities

>>

Transition

Default source and target drives are shown with possible alternative choices.

4. To choose different drive, highlight the drive, press the backspace key to remove the current number,

then type a new number.

5. Highlight

Start

and press Enter.

For transition rate, see “Making Background Activity Settings (CLU)” on page 76.

Locating a Disk Array (CLU)

This feature helps you identify the physical drives assigned to the disk array you are working with in the CLU.

To locate a disk array:

1. Main Menu >>

Disk Array Management

2. Highlight the disk array you want and press Enter.

3. Highlight

Locate Disk Array

and press Enter. The drive carrier status LEDs ash for one minute.

63

Managing with CLUVess A3340s / Vess A3340d / Vess A3340 PoE

/ 243

Bekijk gratis de handleiding van Promise Technology VESS A3340S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.